Universal 7/8" Right Side Handlebar Switch Assembly - Kill & Headlight Switches

Universal right side motorcycle handlebar multi-switch. Perfect for any custom build, or if you just need to replace the stock switches. This is similar to the switch on the 70''s XL125 and XL175''s. We suggest using heat shrink or insulated connectors to protect connections from shorting or getting wet.NOTE: There is a plastic locator pin on this switch as shown in the 3rd photo, you can drill a hole in your handlebars / use an existing hole / or remove the pin with a Dremel or similar tool.Features:Kill Switch - Off and Run positionLight Switch - O P H positions.24" Kill Switch wires - Green / black/wht - both have male bullet terminals20" Headlight wires - Black / brown/wht / wht/yel - all have male bullet - blue/wht wire with female bulletLocator Pin to keep the switch from rotating - *see photo*Specifications:Fits 7/8" Diameter HandlebarsBody Width = 1 1/4" (32mm)Body Height = 2 3/4" (70mm)

• NOTE: There is a plastic locator pin on this switch as shown in the 3rd photo, you can drill a hole in your handlebars / use an existing hole / or remove the pin with a Dremel or similar tool.
• Features: Kill Switch - Off and Run position Light Switch - O P H positions. 24" Kill Switch wires - Green / black/wht - both have male bullet terminals 20" Headlight wires - Black / brown/wht / wht/yel - all have male bullet - blue/wht wire with female bullet Locator Pin to keep the switch from rotating - *see photo*
• Fits 7/8" Diameter Handlebars Body
• Width = 1 1/4" (32mm)
• Body Height = 2 3/4" (70mm)