X10 WS469 Push Button Relay Wall Switch

The X10 Push Button Relay Wall Switch replaces a standard wall switch to add X10 control to a connected wired load. The Push Button Relay Wall switch works with lighting fixtures including incandescent, LED, Fluorescent, Halogen, and more! The switch comes with a built-in LED to indicate on/off status and help you find the switch at night.Responds to X10 On/Off commandsSupports 1000W lights and 120V/10 Amp appliancesBuilt-in LED indicates On/Off Status and guide you through the darkContentsX-10 Relay Wall SwitchNOTE: Wallplate not included. Neutral wire required.The X10 Appliance Wall Switch With Silent Relay Is An X10 Wired-In ReceiverA basic X10 system includes a Transmitter and a Receiver – both sold separately. Transmitters are control devices that send X10 signals through your home's electrical wiring to X10 Receivers. When a Receiver receives a command, it responds by turning a light, appliance or other electrical device On or Off, and sometimes Dim or Bright.Technical DetailsMPN: WS469UPC: 099081830262Dimensions: 4.8 x 3 x 3 inchesMax Voltage: 10 Amp; 1000 WattsWarranty: 120 Day Limited

• Turn on your ceiling & wall fixtures from anywhere in your house
• Push Button Style X10 Relay Wall Switch . Includes X10 updated relay .
• Cover plate not included
• 3-Way & Single Pole (On/Off only) Not a dimmer
• NOTE: This problem is most likely caused by line noise. The noise on the line stops the X10 signal from getting through so you can't turn the light on. BUT if you turn the light on from its push button, it puts a load across the line that attenuates the noise, so now you can dim or turn off the light. As soon as you turn it off, and remove the load, the noise pops back up. You need to determine the source of the noise and filter it.